Profile

Tania Guerrero

Contact Details

 

PLEASE NOTE: All information in your MyIDSA profile is visible only to IDSA members. You may specify otherwise (e.g. make your picture and bio publicly visible) in your privacy settings.

Bio

Operation of temperature and humidity chambers is described in wonderful detail at the Operations Manual of the GSA (General Service Administration). It is by far the most typical manual for operations related to temperature and humidity control. It was printed in 1970. The principal function is to prepare an environment that's free of hazardous conditions, thus enabling controlled manufacturing. There are particular conditions for temperature and humidity chambers based on the GSA.

According to the GSA, all temperature and humidity equipment and components should be properly and safely installed. The temperature control, thermostat and some other temperature or humidity controlling device should be correctly installed and maintained. It's suggested to always get your equipment inspected periodically by authorized personnel. Before you depart for a visit, it's good to check if your equipment is functioning correctly. If you discover any issue, you should report this immediately. You ought to immediately moisturize the affected equipment and eliminate the components in an appropriate way.

If the maker is a certified company, you will find definite instructions on the guide that were issued by them. However, if your manufacturer isn't a certified firm, it's strongly recommended that you don't use their equipment unless it has been tested for security purposes by licensed personnel. You should not use them for anything that may break down or harm the equipment. Failure to adhere to these directions may lead to serious consequences.
The tech should track the pressure in the chamber to make sure that the system is maintaining constant room temperature. This contributes to premature failure of their equipment. In addition, it affects the growth of the employees from the manufacturing components. Improper performance of the chamber results in the accumulation of moisture within the system and that affects the quality and operation of the products manufactured.

The first instruction that's provided in the guide issued from the manufacturer teaches one to fill the water tank with distilled water and to close the valve. This is followed by the procedure to set the temperature and humidity controls. After the adjustment of the controllers, the very first test is performed by putting the unit at room temperature. The testing is done once the water starts leaking and steaming. In the event the steam begins flowing and it seems dark, the chamber is brittle and you should substitute it with a new one.

There are many other techniques that are followed by the manufacturers so as to establish the temperature and relative humidity controllers. However, it's highly advised that the temperature and relative humidity should be controlled using only 1 control valve each pressure equalization valve bundle. If any two control valves are utilized, it could lead to erroneous readings. If the stress is uneven, the consequences can also be wrong. Thus, please follow the specific instructions given below.

So as to make the temperature and relative humidity totally controlled, the operating temperatures and relative humidity shouldn't exceed 40 degrees Centigrade. Furthermore, all the equipment employed in the procedure for quantifying such values must be calibrated and tested before utilizing them for operating the machine. Whether there are any problems encountered while implementing the above mentioned directions, the best alternative is to get in touch with the producer and discuss the probable rectifications. You can also send your request in writing. A good communication ability will help you a great deal in maintaining your business operations into the best level.

It's sensible to modify the operation process according to the requirement if you do not find the results you predicted. Thus, whenever you start a new performance, you must examine the possible changes with the manufacturer. He'll help you decide which procedure needs to be followed closely for measuring the temperatures and relative humidity. When you understand the significance of the methods, it is possible to easily start measuring temperature and humidity with the help of the operation procedures of temperature and humidity chamber. Hopefully, this guide will help you to get maximum advantage from your recently purchased apparatus.